Commercial gas services throughout the UK, 7 days a week

Leicester Commercial Gas Engineers for Factories, Kitchens and Warehouses

Installation, repair, testing, purging and commissioning of commercial gas pipework and plant for food producers, textile firms, restaurants and logistics operators in Leicester and across Leicestershire.

Gas Engineers Who Work Around Production, Not Against It

A gas fault on a food line is a production problem first. Ovens cool, fryers stop, and every hour costs money. Commercial Gas Engineer Near Me is set up for that. Our Gas Safe registered engineers work seven days a week, cover emergency repairs around the clock, and plan installation and testing for the hours when a line is already down.

We work on commercial and industrial gas only: pipework, process burners, boilers, heaters and catering equipment. The company holds SSIP accreditation and engineers carry CSCS cards for site access.

Yellow commercial gas pipework with a pressure gauge and flanged valves in a plant room, typical of the installations our engineers complete in Leicester
Yellow commercial gas pipework with a pressure gauge and flanged valves in a plant room, typical of the installations our engineers complete in Leicester

Snack Lines, Bakeries and Ready Meals at Beaumont Leys and Braunstone Frith

Leicester is one of the biggest food manufacturing centres in the Midlands. Crisp and snack production, bakeries, spice and sauce makers and chilled and ready meal plants are spread across Beaumont Leys, Braunstone Frith, Troon Industrial Estate and the units along the outer ring road.

Process gas here is demanding. Ovens, fryers and steam boilers need a supply that holds its pressure with everything running. We install and extend commercial gas pipework, connect new lines, and repair burners, valves and controls when they fail.

Alterations are done in a planned window, often overnight or at a weekend, followed by a tightness test and purge before the line restarts.

Steam, Pressing and Heating in the Older Textile Factories

The garment and textile trade still runs from multi-storey factories and converted mills in North Evington, Spinney Hills, Highfields and the streets off Belgrave Gate. Many use gas for steam boilers, pressing equipment and space heating, often on shared supplies with several tenants off one meter.

Pipework in these buildings has been added to for decades. Dead legs, unlabelled valves and undersized runs are common. We trace the system, test it, remove or cap what is redundant, and record what is left, so the landlord and each tenant know what feeds what.

Where a boiler or heater is beyond repair, we replace it and commission the new plant. See commercial heating systems.

Plant room with floor-standing gas boilers and insulated pipework, similar to the boiler plant our engineers maintain in Leicester factories
Floor-standing boilers and insulated pipework in a plant room. Older Leicester factories often run steam and heating plant like this on pipework that has been altered many times.

What Does a Kitchen on the Golden Mile Need From a Gas Engineer?

Belgrave Road and Melton Road, the Golden Mile, hold some of the busiest restaurant, sweet centre and banqueting kitchens in the country. Tandoors, wok burners and high output ranges run for long hours, and a fault in the evening means lost covers.

We repair and replace catering appliances, fit gas interlocks linked to the extraction, renew hoses and connections, and install pipework for new kitchens across Leicester. Visits are arranged for mornings or closed days where possible. See commercial catering.

After each inspection a catering gas safety record is issued. See commercial gas certificates.

Warm Air and Radiant Heating at Meridian, Grove Park and Magna Park

Distribution and light industrial parks ring the city: Meridian Business Park and Grove Park to the west, the sheds along the M1 at Lutterworth and Magna Park, and the units around Syston and Thurmaston to the north. Most are heated by warm air or radiant tube heaters at high level.

We repair, service and replace these heaters and the pipework that feeds them, and we fit new systems in units being refurbished. Heater work is best booked in late summer, before the first cold morning brings a rush of breakdown calls. When one does fail in winter, our emergency gas repairs team attends at any hour.

How Is a New Gas Supply Tested, Purged and Commissioned?

New or altered pipework has a strength test first, then a tightness test to IGEM/UP/1 or IGEM/UP/1A. The pipework is pressurised, left to settle and watched for a set period. If the pressure holds within the permitted limit, it passes.

Purging comes next. Air is displaced with gas so appliances can be lit safely. On large factory mains we use nitrogen purging, so gas and air are never mixed inside the pipe. See gas testing and purging.

Commissioning finishes the job. Each appliance is lit, set to the manufacturer figures and checked under full load, safety devices are proved and the readings are recorded. You receive the test, purge and commissioning records for the building file.

See our full range of commercial gas services, including commercial gas certificates and commercial catering, or nearby areas such as Nottingham and Coventry.

Decommissioning and Capping Between Tenancies on Multi-Let Estates

Units on the estates around Leicester change hands often. When a tenant leaves, the gas installation they used should be made safe before the next fit out starts. We isolate the section, purge it to a safe point outdoors, cap the open ends and label the pipework.

For a new tenant, the process runs the other way. We test the existing pipework, extend it for the new equipment, and purge and commission before opening. The landlord receives a record at each stage.

Cadent, Leicester City Council and the Leicestershire Districts

Cadent owns and operates the gas distribution network across Leicester and the East Midlands. It is responsible for the service pipe and meter up to the emergency control valve. New connections, larger meters and disconnections are arranged with Cadent or through your gas supplier. Our work starts at the meter outlet.

Leicester City Council is the highway authority within the city, so excavation in a public road or footway needs its agreement first. Outside the city, Leicestershire County Council is the highway authority for the districts of Blaby, Charnwood, Harborough, Hinckley and Bosworth, Melton, North West Leicestershire and Oadby and Wigston. We keep buried pipework inside the site boundary where we can.

Beyond Leicester: Loughborough, Hinckley and the Wider LE Postcodes

We cover LE1 to LE9 in and around the city, including Oadby, Wigston, Glenfield, Enderby, Birstall and Syston. Further out we work in Loughborough, Hinckley, Market Harborough, Melton Mowbray, Coalville, Lutterworth and Ashby-de-la-Zouch, and across Rutland.

Sites near the county border are covered too: Nuneaton in the CV postcodes, Nottingham, Derby, Northampton and Peterborough. Our engineers travel across the East Midlands and the rest of the UK.

Talk to Us About Your Site

If you run a factory, a kitchen, a warehouse or a commercial property in Leicester, call Commercial Gas Engineer Near Me on 08000 855 077 or email [email protected]. We will talk through the repair, installation or testing you need and send a free, no-obligation quote.

Facilities managers, contractors and landlords with several sites are welcome to discuss a programme of work in one call.

Discuss Your Requirements

Tell us about your project in Leicester or the surrounding area and our team will provide expert advice and a practical solution. Call now for a free, no-obligation quote.

Call 08000 855 077 Free Quote