Commercial Gas Engineers in Manchester for Testing, Repairs and New Pipework

Gas Engineers for a City of Landlords, Tenants and Shared Supplies

Much of Manchester is let space: office floors at Spinningfields, NOMA and Piccadilly, ground floor units under residential towers, wholesale units in Cheetham Hill and Strangeways, hotels at Airport City, and industrial units at Trafford Park, Sharston and Newton Heath. Every one has a gas installation that belongs to somebody, and someone who must keep it safe.

Commercial Gas Engineer Near Me works for the people who carry that duty: landlords, managing agents, facilities managers, operators and the contractors who fit out and refurbish for them. Our engineers are Gas Safe registered and work on commercial and industrial systems only.

Why Do Manchester Landlords Ask for a Tightness Test?

A tightness test proves that pipework holds pressure and is not leaking. Landlords ask for one at the start and end of a lease, after a refurbishment and when a unit has stood empty. Insurers and licensing teams ask for the record as well.

On a multi-tenant building, one supply may serve several occupiers through a common riser. We plan the test so that every affected tenant is told, the shutdown is short, and each branch is proved on its own. Testing follows IGEM/UP/1 or IGEM/UP/1A, depending on the size of the installation. See gas testing and purging.

The result goes on a signed record showing the test pressure, the settling and test periods and the permitted drop, so the next person to read it can see exactly what was proved and when.

Repairs in Occupied Buildings Around Deansgate and Piccadilly

Faults in a live building need a quick, tidy response. We repair boilers, water heaters, kitchen appliances and pipework, retest the section, purge it and relight. Out of hours visits are arranged where a shutdown during the working day would disrupt tenants. Our emergency gas repairs engineers are available 24/7.

If you smell gas, call the National Gas Emergency Service on 0800 111 999 first. They make the supply safe, and we carry out the repair that follows.

Common faults include boilers locking out on ignition, water heaters short of pressure, and kitchen appliances with worn hoses or failed flame supervision devices. Where the fault is in the pipework itself, we trace it with a gauge and a detector rather than guessing.

Buried Supplies and Live Connections at Trafford Park and Salford Quays

On large estates the supply between a meter house and a distant building runs underground in polyethylene pipe. We lay and joint it, test it before backfilling and record the route. See underground gas pipework.

Where a plant cannot shut down, hot tapping lets us add a branch to a live main. Large volumes are purged with nitrogen so that gas and air never mix inside the pipe, and the purge is recorded.

The same estates carry large diameter steel mains feeding ovens, boilers and process burners. New sections are strength tested to prove the joints, then tightness tested to IGEM/UP/1, before any gas is let in.

Commissioning and Decommissioning Plant Across Manchester

See our full range of commercial gas services, including commercial gas installation and commercial gas certificates, or nearby areas such as Liverpool and Bradford.

Kitchens From the Arndale to Didsbury and the Airport Hotels

Hotel kitchens at the airport, food halls and restaurants in the centre, and the neighbourhood dining of Didsbury, Chorlton and Prestwich all run on gas. We install and test kitchen pipework, fit the interlock between the gas supply and the extraction system, and carry out the annual catering inspection. Visits are booked before or after service so that trading is not interrupted. See commercial catering.

Warehouse Heating in Wythenshawe, Sharston and Newton Heath

Industrial units to the south and east of the city are heated by high level warm air and radiant heaters. We repair and replace them, resize the pipework when a unit changes use and inspect the system each year. See commercial heating systems.

Where a unit is split between two tenants, the supply is separated and each half is tested and recorded on its own, so that each occupier holds a record for their own installation.

Who Do You Contact About Gas Supplies and Road Openings?

Cadent operates the gas distribution network across Greater Manchester. It owns the mains and the service pipe up to the emergency control valve, and new connections, larger meters and disconnections are arranged with Cadent or your gas supplier. Our work starts at the meter outlet.

Manchester City Council is the highway authority for the city, and any excavation in a public road or footway needs its permission. Salford, Trafford, Stockport and the other boroughs of the Greater Manchester Combined Authority manage their own streets, and work near the Metrolink lines involves Transport for Greater Manchester.

Stockport, Oldham, Bolton, Bury, Wigan and the Postcodes Beyond M

We cover every M postcode, from the city centre to Salford, Stretford, Sale, Didsbury, Prestwich, Wythenshawe and the airport. Beyond the city we work in Stockport (SK), Oldham and Rochdale (OL), Bolton and Bury (BL), Wigan and Leigh (WN), and Altrincham and Warrington (WA).

Macclesfield, Glossop and the rest of the North West are within reach, and our engineers work throughout the UK. Coverage does not stop at the city boundary, and a site in Wigan or Glossop is served in the same way as one in the centre.